Parkside PFSA 20-Li A1, Translation Of The Original Instructions

Page: 8 / 76

PFSA 20-Li A1
GB
│
IE
│
NI
│ 3 ■
High-speed battery charger PLG 20 A1*
INPUT
Rated voltage 230–240 V ∼, 50 Hz (AC)
Rated power
consumption
65 W
Fuse (internal) 3 .15 A
T3.15A
OUTPUT
Rated voltage 21 .5 V (DC)
Rated current 2 .4 A
Charging time approx . 60 min
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise and vibration data
Noise measurement value determined in accordance
with EN 60745 . The A-rated noise level of the
power tool is typically as follows:
Sound pressure level
L
pA
= 72 dB (A)
Uncertainty K = 3 dB
Sound power level L
WA
= 83 dB (A)
Uncertainty K = 3 dB
Wear ear muffs!
Total vibration value of the handle a
h
< 2 .5 m/s
2
Uncertainty K = 1 .5 m/s
2
Symbols on the appliance
Always wear safety goggles .
Always wear a mask .
NOTE
► The vibration emission value given in these
instructions has been measured in accord-
ance with a standardised test procedure and
can be used for comparison of the power
tool with another tool .
► The specified vibration emission value can
also be used to make an initial exposure
estimate .
WARNING!
► The vibration emission value may differ from
the stated value during actual use of the
power tool, depending on of the manner in
which the power tool is being used .
► Try to keep the vibration loads as low as
possible . Measures to reduce the vibration
load are, e .g . wearing gloves and limiting the
working time . Wherein all states of operation
must be included (e .g . times when the power
tool is switched off and times where the power
tool is switched on but running without load) .
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool .
1 . Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes .
c) Keep children and bystanders away while
operating a power tool.
Distractions can
cause you to lose control .