Parkside PFSA 20-Li A1, Translation Of The Original Instructions

Page: 14 / 76

PFSA 20-Li A1
GB
│
IE
│
NI
│ 9 ■
Filling with spray material
♦ Unscrew the paint cup from the spray unit .
♦ To work on a horizontal object, place the riser
pipe in front, facing the nozzle head . To
work overhead, place the riser pipe at the
back, facing the motor unit .
♦ Fill the paint cup with the spray material and
screw it firmly onto the spray unit .
Switching the appliance on/off
Working methods
♦ Hold the spray gun at a constant distance from
the object . The ideal spraying distance is
approx . 15 cm .
♦ Work out the best settings by carrying out a
test .
♦ Do not switch the appliance on/off over the
spray surface . Rather, start/end the spraying
process approx . 10 cm from the spray surface .
Switching on
♦ To switch on, pull the trigger and keep it
pressed in .
Switching off
♦ To stop spraying, simply release the trigger .
Adjust spray pattern
Set the spray rate
♦ Turn the spray volume adjusting wheel to the
desired position:
♦ (–) = minimum spray rate
♦ (+) = maximum spray rate
NOTE
► We recommend starting at the minimum
setting .
Selecting a jet type
♦ Undo the union nut .
♦ Turn the protruding parts of the nozzle head
so that they point to the desired symbol on the
spray unit .
The appliance has the following settings:
▯ round jet
vertical flat jet
horizontal flat jet
♦ Re-tighten the union nut .
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
ATTENTION!
► Never immerse the paint spray gun completely
in solvent .
NOTE
► Thorough cleaning after every use is very
important for safety and operation .
Otherwise, the needle could get blocked and
proper operation of the appliance cannot be
guaranteed .
■ Wear suitable gloves when cleaning .
■ After every use, squirt water through the
appliance .
♦ To clean the spray unit , nozzle head ,
nozzles and the spray holes inside, use
the supplied cleaning brush , cleaning
needle or a cloth . Never use petrol, solvents
or cleansers which can damage plastic .
♦ Store the device only in dry interior rooms .