background image

GB/MT

- 31 -

• 

 Do not let the cable touch any parts of your 
body.

• 

 Only use the extension cable approved for 
use in the working area.

• 

 The unit must only be started and stopped 
when it is inside a mixing vessel. Ensure that 
the mixing vessel is placed on a solid, secure 
base.

• 

 Never reach into the mixing vessel with your 
hands or any other object during the mixing 
process.

• 

 We recommend that you always wear indus-
trial safety gloves and safety googles when 
working with the mixer.

• 

 Wearing close-fitting clothes is mandatory.

• 

 Always allow for reaction torque

• 

 The appliance is to be fused with a residual 
current protective device (RCD) with rated re-
sidual current of no more than 10mA, to avoid 
danger. Test this at regular intervals.

Residual risks

Even when the equipment is used properly, a cer-
tain residual hazard cannot be ruled out. The fol-
lowing potential dangers may arise in connection 
with the equipment‘s design and construction:

• 

 Contact with the rotating tool (injuries through 
crushing)

• 

 Reaching into the tool while it is rotating (inju-
ries through cutting)

• 

 Damage to hearing if the compulsory hearing 
protection is not used

• 

 Electric shock upon contact with non-insulated 
electrical parts.

If the instructions listed in the operating instructions 
are not adhered to, improper handling of the 
equipment may result in other residual risks.

Do not lose these safety instructions

3. Layout and items supplied

3.1 Layout (Fig. 1/2)

 1.   On/Off switch
2.   Locking knob
3.   Handle
4.   Open-ended wrench for changing the mixing 

tool

5.   Mixer holder
6.   Mixer

3.2 Items supplied

• 

 Open the packaging and take out the equip-
ment with care.

• 

 Remove the packaging material and any 
packaging and/or transportation braces (if 
available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 
transport damage.

• 

 If possible, please keep the packaging until 
the end of the guarantee period.

Important!
The equipment and packaging material 
are not toys. Do not let children play with 
plastic bags, foils or small parts. There is 
a danger of swallowing or suffocating!

• 

 Paint and Mortar Mixer PFMR 1400 A1

• 

 Mixing  tool

• 

 2 open-ended wrench for changing the mi-
xing tool

Anleitung_4258593_LB5.indb   31

Anleitung_4258593_LB5.indb   31

18.11.11   09:57

18.11.11   09:57

Summary of Contents for PFMR 1400 A1



















































Reviews: