6 GB/IE/CY
Introduction
Power scraper
Q
Introduction
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. To help you do this please read
the accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.
Q
Intended Utilisation
The appliance is suitable for the removal and abra-
sion of coverings such as carpets, felts, cork sheets
and plaster on small areas. It is also intended for
removing residues of adhesives, paints and fillers,
for the smoothing of coarse surfaces as well as for
carvings on soft woods. Any other use of, and
modification to, the appliance is deemed to be
improper usage and may result in serious physical
injury. The manufacturer declines to accept respon-
sibility for damage(s) arising out of usage contrary
to the instructions specified below. The appliance is
not intended for commercial application.
Q
Fittings
1
ON / OFF switch / Stroke rate preselector
2
Tool arrestor
3
Tool receptor
4
Tool attachment
5
Knife / Scraper attachment (offset)
6
Knife / Scraper attachment (straight)
7
Spatula attachment
8
Chisel attachment
Q
Items supplied
1 Power scraper
1 Knife / Scraper attachment (offset)
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Safety class II
Observe caution and safety notes!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Caution – electric shock!
Danger to life!
Keep children away from electrical
power tools!
Explosive material!
Protect electrical power tools from
moisture!
n
0
Nominal stroke rate
Check that the device, mains lead
and plug are in good condition!
V~
Volt (AC)
Dispose packaging and appliance in
an environmentally-friendly way!
W
Watts (Effective power)
30164_Elektroschaber_Content_LB6.indd 6
09.04.09 09:14
