Parkside PDSSAP 20-Li A1, Translation Of The Original Instructions

Page: 52 / 75

PDSSAP 20-Li A1
■
48
│
GB
│
MT
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the recharge-
able battery from heat (for example, from
continuous exposure to sunlight), fire, water
and moisture.
There is a risk of explosion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained.
b) Never try to repair damaged batteries. Main-
tenance of batteries should only be carried out
by the manufacturer or an approved customer
service centre.
Appliance-specific safety instructions
for impact wrenches
■ Wear ear muffs when using the impact
wrench.
Exposure to loud noise can lead to
hearing loss.
■ Secure the workpiece. A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
■ Hold the power tool firmly. High torques can
occur for brief periods while tightening and
loosening screws.
■ Wait until the power tool has come to a stand-
still before putting it down.
The accessory tool
can jam, leading to loss of control of the power
tool.
■ Hold the power tool by the insulated gripping
surfaces when performing an operation
where a screw may contact hidden wiring.
If a
screw comes into contact with a live wire, this
may make exposed metal parts of the power
tool live and could give the operator an electric
shock.
Original accessories/attachments
■ Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.
WARNING!
■ Do not use any accessories that are not
recommended by PARKSIDE. Doing so could
lead to an electric shock and/or fire.
ATTENTION! Hot surface.
There is a risk of burns.
IB_329780_PDSSAP20-LiA1_LB5.indb 48 07.08.20 13:57