background image

19

PDSP 1000 B2

GB

 WARNING!

 

The vibration level specifi ed in these instruc-
tions has been measured in accordance with 
the standardised measuring procedure speci-
fi ed in EN ISO 28927 and can be used to 
make equipment comparisons. The specifi ed 
vibration emission value can also be used to 
make an initial exposure estimate. 
The vibration level varies in accordance with 
the use of the compressed air tool and may 
be higher than the value specifi ed in these 
instructions in some cases. It is easy to under-
estimate the vibration load if the compressed 
air tool is used regularly in a certain manner.

NOTE

 

For an accurate estimate of the vibration load 
during a certain working period, the times 
during which the appliance is switched off  or 
is running but not actually being used must 
also be taken into consideration. This can 
signifi cantly reduce the vibration load over 
the total working period.

 

General safety notices 

 WARNING!

 

Read all safety warnings and all instructions. 
Failure to follow the warnings and may result 
in electric shock, fi re and/or serious injury.

Save all warnings and instructions for future 
reference!

Workplace safety

a)  

Keep your working area clean and well lit.

 

Cluttered and dark areas invite accidents.

b)  

Do not operate tools in explosive atmospheres, 
such as in the presence of fl ammable liquids, 
gases or dust.

 Tools can create sparks which 

may ignite the dust or fumes.

c)  

Keep children and bystanders away while 
operating a tool.

 Distractions can cause you

to lose control.

Device-specifi c safety instructions for 
compressed air sandblasters

 

Check the appliance for any possible defects 
before use. If the appliance exhibits any faults, 
it should not be used under any circum-
stances.

 

Keep children and bystanders away while 
operating the tool. Distractions can cause 
you to lose control.

 

RISK OF INJURY! MISUSE! Do not point the 
tool towards people or animals!

 

 Wear a dust mask.

 

 Wear safety goggles!

 

 Wear protective gloves!

 

RISK OF EXPLOSION! The compressed air 
sandblaster gun should not be used in areas 
with gas/open fl ames/fi re/gas-operated 
water heaters.

 

SMOKING PROHIBITED!

 

Work only in suffi  ciently ventilated rooms.

 

Do not use oxygen or any combustible gas 
as an energy source.

 

Never exceed the maximum operating pres-
sure of 6.3 bar.

 WARNING!

 

KICKBACK FORCES! At high working pres-
sures, kickback can occur which can, under 
certain circumstances, lead to danger due to 
continuous loads.

 

RISK OF INJURY! Disconnect the appliance 
from the compressed air source before starting 
any repairs or maintenance work and before 
transportation.

 

RISK OF INJURY! Disconnect the appliance 
from the compressed air source before refi lling 
the blasting medium.

NOTE

 

Please heed the safety instructions provided 
by the manufacturer of the blasting medium.

IB_43089_PDSP1000B2_LB2.indb 19

19.08.14 14:49

Summary of Contents for PDSP 1000 B2






























Reviews: