Parkside PDS 30 A1, Operating Instructions Manual

Page: 6 / 36

GB
│
IE
│
NI
│ 3 ■ PDS 30 A1
Safety instructions
CAUTION! RISK OF INJURY!
►
Check the prop before every use to make sure it is
in perfect condition. If you notice any damage you
may no longer use the prop.
►
Ensure that the prop locking screw is always tightly
fastened when under load and that both locking
bolts are completely engaged.
►
Only use the prop on clean, non-slip and level
ground and in a stable position.
►
Check the prop before every use to make sure it is in
perfect technical condition.
►
Never remain under supported loads.
CAUTION! PROPERTY DAMAGE!
►
Only use the prop for short-term erection and not for
permanent propping of ceilings, beams etc.
►
Please note that the prop or the supporting material
can be damaged by high pressure.
►
Never place more than 30 kg payload on the prop
at an inclination of 90°. At a lower inclination, the
max. load of the prop is lowered significantly.
►
Use the prop only at an inclination between 65°
and 90°.
►
Never use the prop for purposes other than those
described in these instructions.
IB_353782_PDS30A1_LB6.indb 3 21.01.2021 15:10:56