background image

5

GB

 

Check the connection cable of the electric tool regu-
larly and have it replaced by a recognised specialist 
when damaged.

 

Check theextension cable regularly and replace it if 
damaged.

 

Keep handles dry and free from oil and grease.

15.  Pull the connector out of the socket

 

When the electric tool is not in use or prior to mainte-
nance and when replacing tools such as saw blades, 
bits, milling heads.

16.  Always remove keys and wrenches after use

 

Always check that keys, wrenches and other adjusting 
tools have been removed before you switch on the 
equipment.

17.  Avoid unintentional starting

 

Make sure that the switch is turned off when connecting 
the tool to the power supply.

18.   Use extension cables for outdoors

 

Check that it is approved for outdoor duty and is 
marked accordingly.

19.  Be alert at all times

 

Watch what you are doing. Use common sense when 
working. Never use the tool when you are distracted.

20.   Check the electric tool for potential damage

 

Protective devices or other parts with minor damage must 
be carefully inspected to ensure that they function correctly 
and as intended prior to continued use of the electric tool.

 

Check whether the moving parts function faultlessly and 
do not jam or whether parts are damaged. All parts 
must be correctly mounted and all conditions must be 
fulfilled to ensure fault-free operation of the electric tool.

 

Damaged protective devices and parts must be prop-
erly repaired or replaced by a recognised specialist 
workshop, insofar as nothing different is specified in 
the user manual.

 

Damaged switches have to be replaced by a customer 
service workshop.

 

Do not use any electric tool on which the switch cannot 
be switched on and off.

21.  ATTENTION

 

The use of other insertion tools and other accessories 
can entail a danger of injury.

22.   Have your electric tool repaired by a qualified 

electrician

 

This electric tool conforms to the applicable safety 
regulations. Repairs may only be performed by an 
electrician using original spare parts. Otherwise ac-
cidents can occur.

WARNING

This electric tool generates an electromagnetic field during op-
eration. This field can impair active or passive medical implants 
under certain conditions. In order to prevent the risk of serious 
or deadly injuries, we recommend that persons with medical 
implants consult with their physician and the manufacturer of 
the medical implant prior to operating the electric tool.

6.2 Additional safety instructions

• Switch the machine off immediately and pull the power plug 

in an emergency.

• Follow all these safety instructions before and while working 

with the saw.

• Do not use this saw to cut fire wood.
• Do not use this saw to cross-cut roundwood without a suit-

able holding device.

• The machine is equipped with a safety switch to prevent it 

from being switched on again accidentally after a power 
failure.

• If you need to use an extension cable, make sure its conduc-

tor cross-section is big enough for the saw’s power consump-
tion. Minimum cross-section 1,5 mm

2

.

• If you use a cable reel, the complete cable must be pulled 

off the reel.

• Persons working on the machine should not be distracted.
• After you have switched off the motor, never slow down the 

saw blade by applying pressure to its side.

• Only fit blades which are well sharpened and have no cracks 

or deformations.

• Faulty saw blades must be replaced immediately.
• Never use saw blades which do not comply with the data 

specified in this manual.

• It is imperative to make sure that all devices which cover the 

saw blade are in good working order.

• Never dismantle the machine’s safety devices or render them 

inoperative.

• Damaged or faulty safety devices have to be replaced im-

mediately.

• Never cut workpieces which are too small to hold securely 

in your hand.

• Never load the machine so much that it cuts out.
• Always press the workpiece firmly against the saw table.
• Never remove loose splinters, chips or jammed pieces of 

wood when the saw blade is running.

• Switch the machine off to rectify faults at the blocked plug-in 

tool. - Pull the power plug- Remove the blockage. Important! 
Risk of injury from saw blade! Wear gloves. Carry out a trial 
run without a workpiece. Ensure that no unusual noise or 
vibration occurs. Should this be the case, switch the unit off 
and contact the manufacturer.

• Carry out retooling work, adjustments, measurements and 

cleaning jobs only when the motor is switched off. - Pull the 
power plug. -

• Before switching on, make sure that all keys and wrenches 

have been removed from the tool.

• Switch off the motor and pull the power plug before you 

leave the workplace.

• Electrical installation work, repairs and maintenance may 

only be carried out by persons who have been specially 
trained.

• Refit all guards and safety devices immediately after you 

have completed any repairs or maintenance work.

• Be sure to observe the safety information and operating and 

maintenance instructions issued by the manufacturer, as well 
as the dimensions listed in the Technical Data.

• It is imperative to observe the accident prevention regula-

tions in force in your area as well as all other generally rec-
ognized rules of safety.

• Note the information published by your professional asso-

ciations (VBG 7).

• The saw is intended to be used indoors only.

Summary of Contents for PDS 120 B2





























































Reviews: