Parkside PDOS 200 B2, Translation Of The Original Instructions

Page: 20 / 124

2 0
G B I E
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal. Before using the prod-
uct, familiarise yourself with all of
the operating and safety instructions.
Use the product only as described
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Intended use
The bench double grinder is suitable for
sharpening tools (e.g. knives, scissors,
chisels) and for deburring and grinding of
small workpieces made of metal.
The device is not intended for all other
types of applications (e.g. grinding with
unsuitable grinding tools, grinding with a
coolant solution, grinding hazardous mate-
rials such as asbestos).
The equipment is intended for use in the
-
cial use.
The equipment is designed for use by
6
are permitted to use the equipment only
under supervision. The manufacturer shall
not be liable for damages caused by use
other than for the intended purpose or by
incorrect operation.
Content
Introduction ............................... 20
Intended use .............................. 20
General description .................... 21
Scope of delivery ........................... 21
Function description........................ 21
Summary ...................................... 21
Technical specifications ............... 21
Safety Instructions...................... 22
Symbols and icons ......................... 22
General safety instructions .............. 23
Further Safety Instructions ................ 24
Residual risks ................................. 25
Assembly ................................... 26
Assemble/adjust spark protection .... 26
Assemble/set workpiece supports .... 26
Screw device on to workbench ........ 27
Operation .................................. 27
Switching on and off ...................... 27
Grinding with the grinding disc ....... 28
Change grinding disc ..................... 28
Cleaning and maintenance ......... 29
Cleaning ....................................... 29
General maintenance ..................... 29
Storage ...................................... 30
Waste disposal and
environmental protection ........... 30
Replacement parts/accessories ... 30
Trouble Shooting ........................ 31
Guarantee ................................. 32
Repair Service ............................ 33
Service-Center ............................ 33
Importer .................................... 33
Translation of the original
EC declaration of conformity .... 111
Exploded Drawing ................... 119