GB
- 9 -
2.9 Dangers due to vibrations
•
Vibrations can injure the nerves and cause
blood circulation disorders in your hands and
arms.
•
Wear warm clothing when you work in cold
surroundings. Keep your hands warm and
dry.
•
Stop using the equipment if you experience
numbness, tingling, pain or whitening of the
skin on your fingers or hands, and consult a
doctor.
•
Do not hold the plug-in tool with your free
hand as this will lead to a higher vibration
load.
•
Hold the equipment with a light but secure
grip, noting the reaction forces which arise in
the process. The risk of disorders caused by
vibrations is always greater with a tight grip.
2.10 Additional safety information for
pneumatic machines
•
Compressed air can cause serious injuries.
•
Disconnect the compressed air coupling and
depressurize the equipment before you ser-
vice, repair or transport the equipment and
before you change the chisel.
•
Never direct compressed air at yourself or at
any other persons.
•
Whipping hoses may cause serious injuries.
You must always make sure therefore that the
hoses and their fasteners are undamaged and
have not become disconnected.
•
When you release the quick-lock coupling,
hold the hose securely in your hand and ne-
ver use defective connectors. This will help to
prevent injuries caused by a whipping com-
pressed air hose.
•
Do not let cold air flow over your hands.
•
Do not use any quick-lock couplings at the air
inlet. Use hose connections with a hardened
steel thread (or a material with comparable
resistance to vibrations).
•
If universal rotary couplings (claw couplings)
are used, lock pins must be installed and a re-
tention system for compressed air hoses used
in order to protect against possible faulty con-
nections („hose to tool“ or „hose to hose“).
•
Do not exceed the maximum permissible ope-
rating pressure.
•
Do not carry compressed air tools by their
hoses.
Keep this safety information in a safe
place.
3. Layout and items supplied
3.1 Layout (Fig. 1/2)
1. Cylinder
2. Trigger
lever
3. Air regulation screw
4. Nipple
5. Tensioning
spring
6. Flat chisel (universal chisel)
7. Pointed
chisel
8. Rivet parting chisel
9. Parting chisel (sheet-metal chisel)
10. Spot-weld parting chisel
11. Special compressed air oil
3.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a danger of swallowing or suffocating!
•
Air chisel hammer
•
Nipple
•
Tensioning spring
•
Chisel set (5 chisels)
•
Special compressed air oil
•
Original operating instructions
Anleitung_4139033_LB4.indb 9
Anleitung_4139033_LB4.indb 9
03.04.12 10:27
03.04.12 10:27
