Parkside PBH 1050 B2, Translation Of The Original Instructions

Page: 30 / 44

PBH 1050 B2
GB
│
MT │
27 ■
Use
Select operating mode
Function selector:
♦ Press and hold the release button on the
function selector switch . Turn the function
selector switch so that the required symbol
engages at the arrow mark:
Function Symbol
Drilling/screwing
Hammer drilling
Chiselling
Chisel position adjust-
ment
Adjusting chisel position:
You can rotate the tool to the required position for
chiselling using this function .
♦ Turn the function selector switch to position .
♦ Turn the tool in the tool holder to the required
position .
♦ Turn the function selector switch to position
for the chiselling function .
Select direction of rotation
♦ Select the direction of rotation by adjusting the
right/left rotation switch .
WARNING!
► The right/left running switch may only
be used / adjusted if the appliance is at a
standstill .
Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch .
Switching the appliance off:
♦ Release the ON/OFF switch .
Switching to continuous operation:
♦ Press the ON/OFF switch . Lock it in the
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch and release it
again .
Preselecting rotational speed
You can use the speed preselector wheel to
preselect the rotational speed .
Level A (low rotational speed) up to level F (high
rotational speed) . The speed you select depends
on the material to be processed . Work out the right
setting with this practical test:
- Levels D–F: high rotational speed:
for hammer drilling/chiselling in concrete or
stone .
- Levels A–C: medium rotational speed:
for drilling in steel or wood .
NOTE
► The set speed is only reached in continuous
operation .