Parkside PBBPS 700 A1, Instructions Manual

Page: 124 / 132

118 GB
General Complete tree pruning saw Clean the exterior and check for damage.
In the event of damage, have a professional repair carried out immedi-
ately.
Saw chain Sharpen regularly, replace in good time.
Chain brake Have it checked in a specialist workshop at regular intervals
Guide rail Turn so that the running surfaces wear evenly. Replace in good time.
Before start up Saw chain Check for damage and sharpness.
Check chain tension.
Guide rail Check for damage.
Chain lubrication Functional check
Chain brake Functional check
On/off switch, throttle inter-
lock, throttle lever Functional check
Fuel and chain oil tank cap Check leak-tightness.
Daily Air filter Clean
Guide rail Check for damage, clean oil inlet hole
Guide bar mount Clean, in particular the oil guide groove
Idle speed Check (saw chain shall not run)
Weekly Fan housing Clean in order to ensure trouble-free routing of cooling air
Spark plug Check, replace if necessary
Silencer Check for clogging
Chain catcher Check for damage, replace if necessary
Screws and nuts Check condition and firm seating
Quarterly Suction head
Fuel tank, chain oil tank Replace
Clean
Storage complete tree pruning saw Clean the exterior and check for damage
In the event of damage, have a professional repair carried out immedi-
ately
Saw chain and guide bar Remove, clean and oil lightly
Clean guide rail guide nut
Fuel tank, chain oil tank Empty and clean
Carburettor Run until empty