18 GB/CY
Adding Nails
Set the On / Off switch
8
to the “0“ position before working on
the product.
Turn the product over.
Squeeze the release button
3a
(see Fig. A).
Pull back on the pusher
3
(see Fig. A)
Follow icon shown on pusher
3
(see Fig. C) and add nails to the
magazine
4
(see Fig. C)
After adding nails, slide the pusher
3
in again until the magazine
4
is fully closed, (see Fig B).
Release the release button
3a
. It must click and lock into place for
the magazine
4
to be closed correctly.
Note:
Use the window on the fill indicator
5
to see if the
magazine
4
is empty.
Functions
Stapling & Nailing
Set the On / Off switch
8
to the “I“ position to switch the product on.
Press the safety contact
6
into the work piece.
Squeeze the trigger
1
whilst holding the product against the work
piece to drive a staple / nail into it.
Set the On / Off switch
8
to the “0“ position to switch the
product off.
Note:
Hold tool firmly and press on work surface before firing to
ensure the complete penetration of the staple / nail.
Clearing Jammed Staples
If a staple is jammed, do not squeeze the trigger
1
.
It may otherwise accidentally be triggered after removing the staple.
Note:
Set the On / Off switch
8
to “0“ position prior to clearing the
jammed staple.
Summary of Contents for PAT 4 C3
Page 3: ...B 4 A 3a 3 3a 6 3 3a 9 5 4 2 8 1 7 7a ...
Page 4: ...C 4 ...
