Parkside PAT 12 B2, Operation Manual

Page: 22 / 85

20 GB
˜
Adding staples
(Fig. B)
Turn the product over.
Squeeze the release buttons
[ 7]
. Pull the push
rod
[ 9]
out of the magazine
[ 8]
.
NOTE
u
Use the window of the fill indicator
[ ]
to
check if the magazine
[ 8]
is empty.
(Fig. C)
Add staples to the magazine
[ 8]
.
Slide the push rod
[ 9]
back in until the
magazine is completely closed.
The release buttons
[ 7]
must click into place
to indicate that the magazine
[ 8]
is properly
locked.
˜
Adding nails
(Fig. B)
Turn the product over.
Squeeze the release buttons
[ 7]
.
Pull the push rod
[ 9]
out of the magazine
[ 8]
.
NOTE
u
Use the window of the fill indicator
[ ]
to
check if the magazine
[ 8]
is empty.
(Fig. D)
Identify the nail icon on the push
rod
[ 9]
and insert the nails into the
magazine
[ 8]
.
Slide the push rod
[ 9]
in until the
magazine
[ 8]
is completely closed.
The release buttons
[ 7]
must click into place
to indicate that the magazine
[ 8]
is properly
locked.
˜
Operation
˜
Stapling/Nailing
(Fig. G)
Press down the safety contact
[ ]
onto the
workpiece.
Hold the product firmly aligned with the
work surface before firing. This ensures the
complete penetration of the staple or nail.
Pull the trigger
[ 3]
while holding the product
against the workpiece.
NOTE
u
Do not trigger the product when the
magazine is empty to prevent excessive
wear.