Parkside PASSK 20-Li B2, Instructions Manual, Page: 26 / 220

GB
26
During breaks in work, the device
can be hung from a belt, using the
integral metal clip (15). Take care
to ensure that the device is switched
off and secured against accidental
activation.
Working Instructions
• The tightening torque depends on the
selected speed and impact duration.
• Use the wireless impact wrench when
tightening screws and nuts exclusively
for pre-assembly. The desired target
torque of the screw or nut is not to
be achieved by the wireless impact
wrench but by means of a torque
wrench which is set to the target
torque.
• The tightening torque actually achieved
must be checked in all cases with a
torque wrench.
• When using the device for longer pe-
riods of time, allow the device to run
for 10 seconds without any load every
now and then.
• In order to achieve optimum impact
force, do not exert any pressure against
the screw/nut.
Always follow the manufacturer‘s
instructions for tightening screws
or nuts. Follow the manufacturer‘s
guidelines for the inspection of
screws or nuts in accordance with
time or performance.
After a wheel change is carried
out, reference is regularly made to
an inspection of the wheel bolts or
nuts. That inspection must be car-
ried out with a torque wrench after
50 to 100 km.
Attach extension
(optional)
1. Push the desired extension (*)
(not included in package) onto the tool
holder (1).
2. Push the desired socket (11-14) onto
the extension (*).
3. To remove it, pull the socket away from
the extension (*).
Cleaning and
maintenance
Turn off the appliance and, before
doing any servicing, remove the
battery.
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not
immerse it in water.
Electric shock hazard!
• Keep clean the ventilation slots ( 4),
motor housing ( 2) and handle
( 6) of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.