16 GB
Inserting a new pleated filter
Fig . H
Set the on/off switch
[
17]
to
O
.
Disconnect the power plug
[
18]
from the
power supply .
Remove the container lid
[
14]
from the metal
container
[
5]
(see “Fixing and removing the
container lid“) .
Turn over the container lid
[
14]
and put it to
one side .
Insert the new pleated filter
[
21]
into the wire
mesh
[
22]
.
Slide the wire mesh
[
22]
with the pleated
filter
[
21]
inside over the filter thread
[
24]
.
Fixing the pleated filter
[
21]
and the wire
mesh
[
22]
: Hold the pleated filter by the
rim . Turn the pleated filter in a clockwise
direction . Once the pleated filter is fixed on
the filter thread
[
24]
, it holds the wire mesh in
place .
The rim of the wire mesh
[
22]
has to press
down the safety switch
[
23]
. Otherwise, the
product does not operate .
Storage
Set the on/off switch
[
17]
to
O
. Disconnect
the power plug
[
18]
from the power supply .
Let the product cool down .
Clean the product (see “Cleaning and
care“) .
Wrap the power cord
[
18]
around the power
cord holder
[
2]
.
The nozzles
[
6]
[
7]
can be placed on the
swivel castors during storage (Fig . E) .
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
inaccessible to children .
The temperature for long term storage
(longer than 3 months) should be between
+10 and +30 °C with a relative humidity not
above 60 % .
