![background image](http://html1.mh-extra.com/html/parkside/pap-6-a1/pap-6-a1_operation-and-safety-notes_4056835040.webp)
40 GB/MT
without an inserted cartridge. By doing this you
will ensure you device continues to operate
perfectly.
Pay attention to the expiry date on the cartridge.
Old or dried-out cartridges can result in over-
loading and damage to the device.
Read the information from the cartridge manu-
facturer about use and working temperatures.
By obeying the cartridge manufacturer’s instruc-
tions diligently you will avoid damaging the device.
Start your work using a low speed setting. This
will avoid overloading the motor and uninten-
tional extrusion of the sealant / adhesive.
Switch the device off immediately if you hear
unusual noises from the device. Otherwise you
may damage the device.
Children or persons who lack the knowledge or
experience to use the device or whose physical,
sensory or intellectual capacities are limited
must never be allowed to use the device without
supervision or instruction by a person responsi-
ble for their safety. Children must never be
allowed to play with the device.
Original ancillaries /
accessories
Use only the ancillaries and accessories
that are detailed in the operating
instructions.
The use of ancillaries and ac-
cessories other than those recommended in the
operating instructions could lead to an increased
risk of personal injury for you.
Before first use
Charging the battery pack
RISK OF ELECTRIC
SHOCK!
Always pull out the mains adapter with
mains plug
9
before cleaning or maintaining the
charger
6
or rechargeable battery pack
2
.
Note!
A new battery pack
2
, or one that has not
been in use for an extended period, must be charged
up before the first / renewed usage.
The battery pack
2
attains its full capacity after
ca. 3-5 charging cycles.
CAUTION!
Always pull out the mains plug
before you insert the battery pack into or remove it
from the charger.
Never charge the battery pack
2
if the ambi-
ent temperature is less than 10 °C or greater
than 40 °C.
1. Insert the rechargeable battery pack
2
into
the charger
6
(see Fig. A).
2. Insert the mains adapter with mains plug
9
into the mains socket. The now illuminated red
charge indicator LED
8
indicates that the
charging process has started. The red charge
indicator LED
8
ceases to illuminate as soon
as the rechargeable battery pack is completely
charged.
3. The green charging control LED
7
signals to
you that the charging process is complete and
the battery pack
2
is ready for service.
Do not charge a rechargeable battery pack
2
for a second time in close succession. Otherwise
there is the danger that the rechargeable battery
pack
2
will become overcharged and its useful
life and that of the charger
6
will be reduced.
Switch the charger
6
off for at least 15 minutes
between successive charging processes. To do this,
pull out the mains adapter with mains plug
9
.
Inserting / removing the
rechargeable battery pack
into / from the device
Inserting the rechargeable battery pack:
Insert the rechargeable battery pack
2
into
the device handle until you feel it engage.
Removing the rechargeable battery pack:
Remove the rechargeable battery pack
2
by
pressing the battery pack release button
3
and pulling the rechargeable battery pack
2
out of the device handle.
General safety advice for electrical power tools / Before first use