![background image](http://html1.mh-extra.com/html/parkside/pamfw-12-b2/pamfw-12-b2_translation-of-the-original-instructions_4046838010.webp)
PAMFW 12 B2
GB
│
IE
│
NI
│
7
■
1 . To remove the battery pack , press the release
button and pull the battery pack out of the
appliance .
2 . Insert the battery pack into the high-speed
charger .
3 . Insert the mains plug into the socket . The control
LED lights up red .
4 . The green charge status indicator LED indi-
cates that the charging process is complete and
the battery pack is ready .
5 . Insert the battery pack into the appliance .
Checking the battery charge level
♦
Press the ON/OFF switch to check the status
of the battery (see also main diagram) . The
status/remaining charge will be shown on the
battery display LED as follows:
♦
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Dust/chip extraction
Materials containing asbestos may not be pro-
cessed . Asbestos is a known carcinogen .
WARNING! RISK OF FIRE!
■
When working with electrical appliances that
can be connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk of fire!
In unfavourable conditions, e .g . when sparks
are flying while sanding metal or metal
residues in wood, wood dust in the bag of
the vacuum cleaner can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after be-
ing worked for a long time . Therefore, avoid
overheating of the material being sanded as
well as the appliance . Always empty the
vacuum cleaner’s dust bag before taking
work breaks .
■
Always use dust extraction .
■
Ensure that your workplace is adequately
ventilated .
■
Observe the regulations applicable in your
country regarding the materials to be worked .
Connecting a dust extraction appliance
♦
Push the dust extraction unit onto the appli-
ance . Fix it in place by fitting the housing attach-
ment .
♦
Push the hose from a suitable dust extraction ap-
pliance (e .g . a workshop vacuum cleaner) onto
the adapter for external vacuum extraction .
Select a tool
NOTE
►
The universal fitting without-tool-change is
suitable for standard accessories .
HCS plunge saw blade 32 mm
Materials:
Wood, plastic, gypsum (plaster) and other soft
materials
Application:
–
separation and plunge saw cuts
–
sawing close to edges, even in hard to reach
areas
Example: sawing of recesses in lightweight walls .
Diamond saw blade
Materials:
Tile adhesives, tile joints
BI
M
HC
S
HCS
B
B
Z64
B2
Summary of Contents for PAMFW 12 B2
Page 3: ...B1 Z52 A1 Z64 B2 HCS C...