![background image](http://html1.mh-extra.com/html/parkside/pamfw-10-8-a1/pamfw-10-8-a1_operation-and-safety-notes_3937955011.webp)
11
GB
Start-up
Checking the battery charge
When the device is on, the battery status indicator
2
indicates the status or the remaining power as follows:
RED / ORANGE / GREEN = maximum
charge / power
RED / ORANGE = medium charge / power
RED = low charge – recharge battery
Selecting the application tool
Note:
The universal system with easy tool change
fits common accessories.
HCS plunge saw blade 95 x 32 mm
Materials:
Wood, plastic, plaster and other soft materials
Use:
· Cut-off and plunge saw cuts
· sawing close to the edge, even in hard to reach
areas
Example: cutting notches in light construction walls.
(see Fig. A and B)
Diamond saw blade
Material:
Tile cement, Tile joints
Use:
· Removing material residue, for example tile
cement when replacing damaged tiles
· Reaming out joint compound between wall and
floor tiles (see Fig. C)
Scraper
Materials:
Motor / cement residue, tile / carpet
adhesive, paint / silicone residue
Use:
· Removing material residue, for example carpet
adhesive residue on floors (see Fig. D)
Grinding plate
Materials:
Wood and metal (sanding sheets included),
paint*, stone*
*depending on sanding sheet
Use:
· Sanding edges and hard to reach areas
(see Fig. E and F)
Attach sanding sheet
to grinding plate
Centre the sanding sheet
15
on the grinding
plate
14
.
Start-up
General safety advice for electrical power tools / Before use
Summary of Contents for PAMFW 10.8 A1
Page 3: ...1 6 11 10 12 14 7 3 4 2 5 9 8 15 16 13 17 18...
Page 4: ...A B C D E F G...
Page 14: ...14...
Page 56: ...56...