Parkside PAHKS 18V, Operating And Safety Instructions Manual

Page: 4 / 12

4
CORDLESS CIRCULAR SAW PAHKS 18 V
For sawing timber and plastic
Please read carefully through the following information concerning safety and proper use. Before
reading, fold out the page with the illustrations and make yourself familiar with all the functions
of the equipment. Please read the operating instructions below and the accompanying safety
advice carefully. Use the equipment only as described and for the indicated purposes.
By doing this you will be able to work in complete safety and produce better results.
Be careful to keep these advice notes and if necessary pass them on to a third party.
FEATURES OF THE PAHKS 18 V
Battery pack Switch lock
Guide plate Second hand grip
Riving knife Parallel guide
Outer flange Attachment screw for parallel guide
Screw Angle adjuster
Blade cover Sawdust removal
Saw blade Rotation direction arrow
On/off switch Depth adjuster
TECHNICAL INFORMATION
Nom. speed, no load: 3000 rpm Quick charger:
Nominal voltage: 18 V Charging current: 1200 mA
Blade diameter: 140 mm Charging duration: 50-60 minutes
Blade gap: 10 mm
Blade thickness: 1 mm
Blade tooth thickness max.: 1.5 mm
Cutting depth 45°:
28 mm
Cutting depth 90°: 40 mm Battery pack:
Sound pressure level: 80.4 dB (A) Nominal voltage: 18 V
Sound power level: 93.4 dB (A) Battery capacity: 1700 mAh
Vibration: 0.3 m/s 2 (vibration) Capacity: 30.6 Wh
Weight: 4.1 kg (no-load speed operation)
SPECIFIC SAFETY ADVICE
In addition, you must also read the advice in the accompanying booklet called "Safety advice"
before using the equipment for the first time.
The cordless circular saw PAHKS 18 V is to be used exclusively for cutting wood and plastic.
Before carrying out any work on the saw, e.g. setting the guide plate etc., always remove
the battery pack
.
Never remove sawdust or splinters whilst the saw is running – always switch off the saw and
remove the battery pack
first.
n0