PAGG 4 A1
■
86
│
DE
│
AT
│
CH
Eindringtiefe der Gravur einstellen
Mit den
+
/
–
Tasten für die Drehzahlregelung
wird die Eindring-
tiefe der Gravur eingestellt. Eine niedrige Einstellung reicht für die
gängigsten Anwendungen meist bereits aus.
♦
Drücken Sie die
+
Taste für die Drehzahlregelung
, um die
Eindringtiefe zu erhöhen.
♦
Drücken Sie die
–
Taste für die Drehzahlregelung
, um die
Eindringtiefe zu verringern.
Gravierspitze auswechseln
VORSICHT! VERLETZUNGSGEFAHR!
►
Schalten Sie vor allen Arbeiten am Gerät das Gerät aus.
♦
Wechseln Sie die Gravierspitze
-
aus, sobald diese abgenutzt
ist und nicht mehr die gewünschten Gravierergebnisse liefert.
Drehen Sie die Gravierspitzenarretierung
gegen den Uhr-
zeigersinn (in Arbeitsrichtung) bis sich die Gravierspitzenarretie-
rung
entnehmen lässt. Entnehmen Sie von unten die Gravier-
spitze
-
aus der Gravierspitzenarretierung
.
♦
Entfernen Sie Feder und Unterlegscheiben.
♦
Schieben Sie Unterlegscheibe und Feder auf eine neue Gravier-
spitze
-
. Setzen Sie diese anschließend ein und drehen Sie die
Gravierspitzenarretierung
zur Verriegelung im Uhrzeigersinn
(in Arbeitsrichtung).
♦
Vergewissern Sie sich, dass die Gravierspitze
-
korrekt fixiert ist.
Summary of Contents for PAGG 4 A1
Page 3: ......