Parkside PABS 20-Li E6, Original Instructions Manual

Page: 140 / 220

22
GB
• Always take heed of the applicable
safety instructions as well as the environ-
mental protection regulations and infor
-
mation.
• The warranty excludes all defects caused
by improper handling.
Removing/
inserting the Battery
Only insert the rechargeable battery
once the battery-operated tool is rea
-
dy for use. Risk of injury!
1. To remove the battery (4) from the ap
-
pliance, press the release button (1) on
the battery and pull out the battery.
2. To insert the battery (4), place it on the
guide track and push it into the appli
-
ance. It will audibly snap in.
Checking the charge status
of the rechargeable battery
The battery charge status indicator (3) sig-
nalises the state of charge of the battery (4).
Press the button (2) on the battery. The
state of charge of the battery is displayed
by illuminating the 3-colour LED lights of
the state of charge display.
3 LEDs light up (red, orange and green):
Battery is fully charged.
2 LEDs light up (red and orange): Battery
has a residual charge.
1 LED lights up (red):
Battery has to be charged
Only charge the battery (4) when the
red LED on the charge status indica
-
tor (3) is on.
Recharging the battery
Allow a hot battery to cool before
charging.
Only charge the battery (4) when the
red LED on the charge status indica
-
tor is on.
1. Remove the battery (4) from the appli
-
ance, as necessary (see „Removing/
inserting the battery“).
2. Insert the battery (4) in the charging
compartment of the battery charger (5).
3. Plug the battery charger (5) into a
mains outlet.
4. When the battery is fully recharged
unplug the battery charger (5) from the
mains.
5. Remove the battery (4) from the char-
ger (5).
Overview of the control display on
the charger:
Green LED (6) lights up without battery
inserted:
Charger ready.
Green LED (6) lights up:
Battery such alleged charged.
Red LED (7) lights up:
Battery charging.
Red LED (7) flashes:
Battery overheated
Red (7) + green (6) LEDs flash:
Defective battery
Used batteries
• If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to be
replaced. Only use an OEM battery
pack replacement available from our
Customer Service.