Parkside PABS 12 A1 Operation And Safety Notes Download Page 39

39 

GB

4.

  

Careful handling and use  

of electrical power tools

a)

  

Do not overload the device. Always 
use an electrical power tool that is  
intended for the task you are under-
taking.

 

By using the right electrical power 

tool for the job you will work more safely and 
achieve a better result. 

b)

  

Do not use an electrical power tool if 
its switch is defective.

 

An electrical power  

tool that can no longer be switched on and off 
is dangerous and must be repaired. 

c)

 

 Pull the mains plug out of the socket 
and / or remove the rechargeable bat-
tery before you make any adjustments 
to the device, change accessories or 
when the device is put away.

 This pre-

caution is intended to prevent the device from 
unintentionally starting.

d)

  

When not in use always ensure that 
electrical power tools are kept out of 
reach of children. Do not let anyone use 
the device if he or she is not familiar 
with it or has not read the instructions 
and advice.

 

Electrical power tools are dan-

gerous when they are used by inexperienced 
people. 

e)

  

Look after the device carefully. Check 
that moving parts are working prop-
erly and move freely. Check for any 
parts that are broken or damaged 
enough to detrimentally affect the 
functioning of the device. Have dam-
aged parts repaired before you use 
the device.

 

Many accidents have their origins 

in poorly maintained electrical power tools.

f)  

Keep cutting tools clean and sharp.

 

Carefully maintained cutting tools with sharp 
cutting edges are less likely to jam and are 
easier to control.

g)  

Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance 
with these instructions and advice, and 
the stipulations drawn up for this par-
ticular type of device. In doing this, take 
into account the working conditions 

and the task in hand.

 

The use of electrical 

power tools for purposes other than those in-
tended can lead to dangerous situations.

5.   Use and handling of the cord-

less electrical power tool

a) 

 Charge a rechargeable battery unit 
using only the charger recommended 
by the manufacturer.

 

Chargers are often  

designed for a particular type of rechargeable 
battery unit. There is the danger of fire if other 
types of rechargeable battery units are used. 

b) 

 Only the rechargeable battery units 
supplied are to be used with an elec-
trical power tool.

 

The use of other recharge-

able battery units may lead to the danger of  
injury or fire. 

c)  

When they are not being used, store 
rechargeable battery units away from 
paperclips, coins, keys. nails, screws 
or other small metal objects that could 
cause the contacts to be bridged.

 

Short-

circuiting the contacts of a rechargeable battery 
unit may result in heat damage or fire.

d)  

Fluids may leak out of rechargeable 
battery units if they are misused. If 
this happens, avoid contact with the 
fluid. If contact occurs, flush the affect-
ed area with water. Seek additional 
medical help if any of the fluid gets 
into your eyes. 

Escaping battery fluid may 

cause skin irritation or burns. 

  

CAUTION! DANGER OF EX-
PLOSION! 

The batteries must  

never be recharged!

6. Service

a)  

Have your device repaired at the ser-
vice centre or by qualified specialist 
personnel using original manufacturer 
parts only.

 

This will ensure that your device 

remains safe to use.

General safety advice for electrical power tools

General safety advice for electrical power tools

Summary of Contents for PABS 12 A1














































Reviews: