Parkside PABK 60 B3, Operation And Safety Notes

Page: 13 / 39

10 GB/IE/NI
General safety instructions for pneumatic tools General safety instructions for pneumatic tools
Do not use the device when
tired or under the influence of
drugs, alcohol or medications.
One moment of carelessness
when using the device may
result in serious injuries.
Do not directly inhale the exhaust
air. Avoid getting exhaust air in
the eyes. Exhaust air from the air
tool may contain water, oil, metal
particles or contaminants from
inside the compressor. These
may damage your health.
BE CAREFUL
WHEN PUTTING DOWN
THE DEVICE!
Always put down
the device so that it is not resting
on the trigger. This could poten-
tially result in accidental activa-
tion of the device, which again
could result in hazards.
Only use suitable accessories.
These may be purchased from
the manufacturer. Using non-OEM
accessories may result in hazards.
Only use filtered and regulated
compressed air. Dust, caustic
vapours and / or moisture may
damage the motor of the com-
pressed air tool.
The hose must be de-
signed for a pressure of
at least 8.6 bar or 125 psi, or at
least 150% of the maximum
pressure created in the system.
The tool and the feed
hose must be provided
with a hose coupling so that the
pressure is completely relieved
by the release of the hose cou-
pling.
The pneumatic device may not
be modified in any way without
the permission of the manufac-
turer.
Only use the pneumatic device
with the prescribed pressure
(max. 0.32 MPa / approx. 3 bar).
The pneumatic device must always
be separated from the air feed
after use or if it is not in use.
Do not use the compressed air
device if it leaks or is in need of
repair.
Never connect the pneumatic
device with a pneumatic hose
whose pressure exceeds 7 bar.
Keep your working area clean
and well lit. Untidy or poorly lit
working areas can result in acci-
dents. Doing so will allow you
better control of the device,
particularly under unforeseen
circumstances.
Only allow the
device to be maintained and
285126_Airbrush-Set PABK 60 B3_content_IE.indd 10 14.06.17 16:34