Parkside PABH 20-Li C3, Original Instructions Manual

Page: 13 / 105

PABH 20-Li C3 GB
│
CY
│
9 ■
Switching off
♦ To switch off the power tool, let go of the
On/Off switch .
■ At low temperatures, the power tool will only
reach its full hammer performance/strike power
after a certain time.
■ To save energy, do not switch the power tool on
unless you plan to use it.
Set drill/hammer speed
■ You can infinitely adjust the drill/hammer speed
of the switched on power tool, depending on
how far the On/Off switch is pressed in.
Pressing the On/Off switch lightly yields a
low drill/hammer speed. Increasing pressure
increases the speed.
Run-on brake
■ When you release the On/Off switch , the
brake stops the chuck and prevents run-on of
the tool.
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
■ The cordless hammer drill is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
Disposal
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling
plant.
Do not dispose of power tools
in the normal domestic waste!
According to European Directive
2012/19/EU, used power tools must
be collected separately and recycled in an environ-
mentally sound manner.
WARNING!
■ Remove the battery before disposal!
Do not dispose of batteries in
your normal household waste!
Remove the batteries from the appli-
ance before disposal. Defective or
worn-out rechargeable batteries must
be recycled according to Directive 2006/66/EC.
Take the battery pack and/or the appliance to a
nearby collection facility.
Please contact your local authority or town council
for information about disposal options for used
power tools/battery packs.
Dispose of the packaging in an envi-
ronmentally friendly manner. Observe
the labels on the different packaging
materials and separate them as
needed. The packaging materials are labelled
with abbreviations (a) and numbers (b) with the
following meanings: 1–7: plastics, 20–22: paper
and cardboard, 80–98: composites.
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product.