Parkside PAA 20-Li B2, Original Instructions Manual

Page: 9 / 65

PAA 20-Li B2 GB │ CY │ 5 ■
Use (see fig. A)
♦ Slide the battery adapter onto a charged battery .
It clicks into place audibly.
LED light (see fig. B)
NOTE
► With the LED light you can e.g. B. illuminate small dark areas
so that you have an additional light source. The LED light may
only be used as supplementary lighting.
Switching on
♦ Press the ON/OFF switch to activate the battery adapter .
The control LED flashes four times and then lights up.
♦ Press the On/Off switch a second time to turn on the LED light .
The control LED only lights up for a short time and can only be
activated during this time.
Switching off
♦ Press the ON/OFF switch again.
The control LED goes out after a short time.
IB_346161_PAA20-LiB2_LB7.indb 5 23.09.20 13:08