7
19.
Avoid unintended start.
Do not carry any tools connected to the mains supply with your finger
on the switch .Ensure that the switch is off when plugging instrument into socket.
20.
Extensions in the open.
Only use authorized and respectively marked extensions for use in
the open.
21.
Be attentive.
Pay attention to what you are doing. Act sensibly. Do not use the power tool
if you are not fully concentrating.
22.
Check the power tool for any possible damages.
Before further use of the power tool,
the protection devices or any lightly damaged parts must be carefully examined. Check whether
the mobile parts function correctly and do no jam or if any parts are damaged. All parts
must be mounted correctly and meet all conditions to guarantee perfect operation of power tool.
Any damaged protection devices and parts must be repaired professionally by a recognized expert
workshop or exchanged, unless otherwise stipulated in the operation manual. Damaged switches
must be replaced at an after-sales workshop. Never use power tools whose switches cannot
be operated.
23.
Make others aware of how to handle the equipment.
If you lend or hand over tools to
another person make sure you explain how to handle the equipment. Always pass on this safety
advice and the instructions for use.
24.
Take care when working from ladders and scaffolds.
Special care must to be taken when
working from ladders or scaffolds. Make sure they are correctly assembled and secured against
slipping.
25.
Attention!
Only use such accessories and auxiliaries that are listed in the operating instructions.
Use of replacement tools other than those stipulated in the operating instructions or other
accessories may entail the risk of injury for operator.
26.
Have your power tool repaired by a professional electrician.
This power tool complies with
the relevant safety regulations. Repair work may only be carried out by a professional electrician
by using original spare parts; otherwise this may entail in accidents for the operator.
DECLARATION OF CONFORMITY
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany,
declare that this product complies with the following EU directives:
Machinery Directive (98/37 EC), Low Voltage Directive (73/23 EEC, 93/68 EEC), Electromagnetic
Compatibility (89/336 EEC, 93/68 EEC) in accordance with the applicable standards, and confirm
this with the CE mark.
Type/machine description: PARKSIDE CORDLESS SCISSORS PAS 3.6
Bochum, 28.02.03
Hans Kompernaß
- Managing Director -
4_GB 18.08.2003 11:30 Uhr Seite 7
