Parkside KH 3049 DRILL SHARPENER, Manual

Page: 9 / 51

10 GB/IE/CY
Put the sharpening stone cover
8
back in
place. Screw the cover in place with the four
sharpening stone cover screws
7
.
Align the sharpening head push rod
9
perfect-
ly with the motor unit push rod
10
. Otherwise
the motor unit
3
will not fit together with the
sharpening stone head cover
1
.
Now place the sharpening head cover
1
pre-
cisely back on to the motor unit
3
(refer to Fig.
E) and tighten the four motor unit screws
6
.
Put the four rubber feet
5
back in place.
Maintenance and cleaning
Apart from replacing the sharpening stone, drill
sharpener is maintenance-free.
Regularly clean the device straight after using it.
To clean the casing, use a dry cloth; on no
account should you use any petrol, solvents or
cleaning agents.
WARNING!
Never open the devices. Any
repairs or replacements should only be carried
out by the service centre or an electrician.
Service
WARNING! Have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only.
This
will ensure that your device remains safe to use.
WARNING!
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre.
This will
ensure that your device remains safe to use.
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile components,
e.g. buttons or batteries. This product is for private
use only and is not intended for commercial use.
The warranty is void in the case of abusive and
improper handling, use of force and internal tam-
pering not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expira-
tion of the warranty period are subject to payment.
GB
DES UK LTD
Tel.:
0871 5000 700 (£ 0.10 / minute)
e-mail: support.uk@kompernass.com
IE
Kompernass Service Ireland
Tel:
1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile
operators may vary.
e-mail: support.ie@kompernass.com
Disposal
The packaging is wholly composed of
environmentally-friendly materials that
can be disposed of at a local recycling
centre.
Do not dispose of electrical
power tools with the household
rubbish!
Use / Maintenance and cleaning / Service / Warranty / Disposal