22 GB
Insert the filter
9
into the union nut
1
as depicted in
Figure A.
For a 26.5 mm thread (G ¾ ): Screw the adapter
10
onto
the tap. Do not use any tools for this purpose.
Screw the union nut
1
onto the thread of the tap or the
adapter. Do not use any tools for this purpose.
Screw the adapter
11
onto the hose connection. You can
then connect a hose to the adapter
11
.
Open the tap.
ATTENTION!
If defects / leaks arise when using the
adapter
10
, the thread of the tap must be wrapped using
sealing tape.
Programme irrigation as described in the chapter “Operation”.
Operation
Irrigation can be fully automated at any time of the day using the
irrigation controller. A sprinkler, sprinkler system or drip irrigation
system may be connected.
The irrigation controller automatically carries out irrigation at
the respective programmed start time and for the programmed
duration. Take the season and time of the day into consideration
