Parkside BJ 2002, Operating And Safety Instructions Manual

Page: 6 / 10

POLISHING
Attachments: Figure k): 3 polishing pads
Areas of use: The polishing pads can be used for most metals and plastics (see Fig. l).
They are particularly suitable for precious metals like gold or silver.
When polishing you must always use very light pressure only.
Speed ranges:
DRILLING
Attachments: Figure m): 6 universal HSS drills
Areas of use: The drills, sized 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, are suitable for metal and plastic (see Fig. n).
Speed ranges:
CHUCKS
Chucks: Figure o): 2 attachment clamps with threaded connection , 4 collet chucks in various
diameters, some also fit the special tools
Areas of use: The range of chucks and clamps ensures that the special attachments can always be fitted
as required.
They guarantee that the tool is securely held and that you will obtain the best results.
Attachment clamp with threaded connection for:
Saw blade , cutting disc ,
Silicon grinding disc (green) , corundum grinding disc (red) ,
polishing pads
2.3 mm collet chuck (standard collet chuck) for:
"diamond bits” ,
silicon grinding point (green) , corundum grinding point (red) ,
1 plastic brush , 1 plastic brushing disc ,
brass brushing disc , milling bits ,
HSS drills 1.2, 1.4, 1.6, 1.8
(for 0.8 and 1.0 drills please use the corresponding size of collet chuck).
6
Material Speed Controller setting
Hardwood maximum
Softwood maximum
Plastic min. – low
Steel low
Aluminium etc. high
Material Speed Controller setting
Steel min. – low
Aluminium and min. – low
precious metals