Parkside 79191, Operation And Safety Notes

Page: 9 / 78

9 GB
General safety advice for electrical power tools
c)
Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or when
the device is put away.
This precaution is
intended to prevent you from unintentionally
starting the device.
d)
When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone use
the device if he or she is not familiar
with it or has not read the instructions
and advice.
Electrical power tools are dan-
gerous when they are used by inexperienced
people.
e)
Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device.
Many accidents have their origins
in poorly maintained electrical power tools.
f)
Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g)
Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this par-
ticular type of device. In doing this, take
into account the working conditions
and the task in hand.
The use of electrical
power tools for purposes other than those in-
tended can lead to dangerous situations.
5. Service
a)
Have your device repaired at the ser-
vice centre or by qualified specialist
personnel using original manufacturer
parts only.
This will ensure that your device
remains safe to use.
Safety advice for all uses
General safety advice for grinding,
sanding (with sandpaper), wire brushing,
polishing and disc-cutting:
a)
This electrical power tool is intended
for use as a grinding, sanding, wire-
brushing, and disc-cutting machine.
Observe all the safety advice, instruc-
tions, information in figures and all
other information you received with
this device.
If you do not observe the following
advice it could lead to electric shock, fire and /
or serious injury.
b) Normative statement / advice for this tool is not
applicable.
c)
Do not use any accessory not specifi-
cally intended by the manufacturer
for this electrical power tool.
Although
an accessory may fit on your electrical power
tool, this does not on its own guarantee that it
can be safely used.
d)
The maximum permitted speed of an
attachment must be at least as high as
the maximum speed indicated for the
electrical power tool.
An accessory rotating
faster than its permitted speed could disintegrate
or fly off.
e)
The external diameter and the thickness
of the attachment must be compatible
with the dimensions of your electrical
power tool.
Attachments that are not dimen-
sionally compatible cannot be adequately
guarded or controlled.
f)
Grinding discs, flanges, grinding
wheels or other accessories must fit
exactly on to the spindle of your elec-
trical power tool.
Attachments that do not
exactly fit on the spindle turn unevenly, vibrate
severely and could lead to loss of control.
g)
Do not use damaged attachments.
Before every use check attachments
such as grinding discs for loose frag-
ments and cracks, grinding wheels for
cracks, deterioration or excessive
wear and wire brushes for loose or
broken wires. If the electrical power