Parkside 384512 2107, Translation Of The Original Instructions

Page: 47 / 64

PBH 1050 C3 ■ 44 │
GB
│
MT
Use
Select operating mode
Function selector
♦ Press and hold the release button on the
function selector switch . Turn the function
selector switch so that the required symbol
engages at the arrow mark:
Function Symbol
Drilling
Hammer drilling
Chiselling
Chisel position adjustment
Adjusting chisel position
You can rotate the tool to the required position
for chiselling using this function.
♦ Turn the function selector switch to
position .
♦ Turn the tool in the tool holder to the
required position.
♦ Turn the function selector switch to
position for the chiselling function.
Select direction of rotation
♦ Select the direction of rotation by adjusting
the right/left rotation switch .
WARNING!
► The right/left running switch may only
be used/adjusted if the appliance is at a
standstill.
Switching on and off
Switching the appliance on
♦ Press the ON/OFF switch .
Switching the appliance off
♦ Release the ON/OFF switch .
Switching to continuous operation
♦ Press the ON/OFF switch . Lock it in the
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation
♦ Press the ON/OFF switch and release it
again.
Preselecting rotational speed
You can use the speed preselector wheel to
preselect the rotational speed. Level 1 (low rota-
tional speed) up to level 6 (high rotational speed).
The speed you select depends on the material to
be processed. Work out the right setting with this
practical test:
–
Levels 4–6: high rotational speed:
for hammer drilling/chiselling in concrete
or stone.
–
Levels 1–3: medium rotational speed:
for drilling in steel or wood.
NOTE
► The set speed is only reached in continuous
operation.