Parkside 384213 2107, Instructions Manual

Page: 52 / 72

PKZ 180 C5
GB
│
MT
│
49 ■
Compressed air hose with quick coupler
Connecting
♦ Push the compressed air connector into the
quick coupler of the compressed air hose ,
the sleeve automatically springs forwards.
Cutting
♦ Pull back the sleeve on the quick coupler of the
compressed air hose
and remove the
compressed air connector .
CAUTION!
► Caution! When disconnecting the quick
coupler of the compressed air hose , hold
the coupler firmly to prevent injuries caused
by the hose flying off.
Inflation
with adapter
Schrader valve
Area of use
This application allows for a simple and accurate
inflation. The manometer
is used to check the
tire pressure. Thanks to the integrated release
valve
it is possible to reduce the tire pressure
if it is too high.
♦ Ensure that the ON/OFF switch is set to "O".
♦ Press the lever quick coupler downwards to
attach it.
♦ Place the lever quick coupler onto the valve
and then release the lever.
♦ Insert the mains plug of the compressor into
a mains power socket.
♦ Switch the ON/OFF switch to "I". The inte-
grated control lamp lights up.
♦ Pull the trigger .
♦ Read the air pressure from the manometer .
♦ Let the trigger off again.
♦ Switch the ON/OFF switch to "O" as soon
as the correct or permissible air pressure has
been reached. The integrated control lamp
goes out.
♦ Press down the lever quick coupler and pull
it off the valve.
♦ Remove the mains plug from the mains
power socket.
using the valve adapter
Sclaverand valve
Dunlop valve
Area of use
The valve adapter facilitates easy inflation of
bicycle tires.
♦ Use the valve adapter to pump to the valves
shown above.
♦ Connect the valve adapter into the lever
quick coupler and then release it.
♦ Start by pressing the valve adapter onto the
valve.
♦ Inflate as described above.