Parkside 380747 2110, Translation Of The Original Instructions

Page: 16 / 268

PAHE 20-Li C3
GB
│
IE
│ 11 ■
Before initial use
Charging the battery pack
(see fig. A)
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect
the battery pack to the high-speed charger .
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level
is between 50% and 80%. The storage
climate should be cool and dry and the
ambient temperature should be between 0°C
and 50°C.
♦ Connect the battery pack to the high-speed
charger.
♦ Insert the power plug into the mains power
socket. The red control LED will light up.
♦ The green control LED indicates that the
charging process is complete and the battery
pack is ready for use.
CAUTION!
♦ If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged.
♦ If the red and green control LEDs
flash simultaneously, this means that the
battery pack is defective.
♦ Fit the battery pack back onto the appliance.
Attaching/disconnecting the battery
pack to/from the device
Attaching the battery pack
♦ Allow the battery pack to click onto the rear
handle of the appliance.
Removing the battery pack
♦ Press the release button and remove the
battery pack .
Checking the battery charge level
♦ Press the battery charge level button to
check the status of the battery. The status/
remaining charge will be shown on the battery
display LED
as follows:
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Fixing/attaching the shoulder strap
♦ Hook the shoulder strap into the carrying
lug .
♦ Adjust the length of the shoulder strap to
your size so that carrying lug is at hip height
when hooked in place.
♦ In addition, you can adjust the height of the
carrying lug on the appliance shaft by
loosening the screw.