Parkside 374065 2104, Translation Of The Original Instructions

Page: 15 / 64

15
CY IE NI GB
General maintenance
Before each use, check the equipment
for obvious defects such as loose, worn
or damaged components and check that
screws or other parts are sitting correctly.
Replace damaged parts.
In particular, check the grinding
disc ( 10). Replace any damaged or
heavily worn grinding discs.
Transport
Switch off the device and unplug
the mains plug.
The grinding disc still runs
even after the device has
been switched off. There is a
risk of injury.
Carry the device with two hands. Grip it at
the device base and motor housing.
Storage
• Store the appliance in a dry place well
out of reach of children.
• Grinding discs must be stored dry and
upright and are not to be stacked.
Waste disposal and en-
vironmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have fi nished with
them.
Machines are not to be place with
domestic waste.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out into
pure materials and recycling can be
implemented. Ask your Service Center
about this.
• Defective units returned to us will be
disposed of for free.