Parkside 360098 2010, Translation Of The Original Instructions

Page: 17 / 183

PAFS 550 A1
GB
│
IE
│ 13 ■
ATTENTION!
► If you are using a metal container, earth the
paint spray gun
7
beforehand .
♦ Release the trigger
9
as soon as the cleaning
fluid starts flowing out .
♦ Lock the paint spray gun
7
by turning the safety
catch
6
with the tip as far back and up as
possible .
♦ Turn the function switch
e
to the vertical
position (PRIME) .
♦ Unlock the paint spray gun
7
by turning the
safety catch
6
so that its tip is facing down .
♦ Drain off the remaining paint by pulling the
trigger
9
. Hold the paint spray gun
7
over
the detergent container while doing so .
♦ Release the trigger
9
as soon as clear cleaning
fluid starts flowing out .
♦ Lock the paint spray gun
7
by turning the safety
catch
6
with the tip as far back and up as
possible .
♦ Turn the pressure regulator dial
3
to position 0
(off) . Remove the plug from the mains socket .
♦ Depressurise the appliance .
♦ Remove the high-pressure hose
w
from the
paint spray gun
7
with the aid of an adjustable
spanner .
♦ Disassemble the nozzle holder
a
along with
the nozzle
5
, holder
o
and plastic ring
i
(see fig . F) . Clean all parts thoroughly using
suitable cleaning agents .
♦ Lock the paint spray gun
7
by turning the safe-
ty catch
6
with the tip as far back and up as
possible .
NOTE
► Clean the HEA filters
q
regularly . Replace
them if cleaning is no longer sufficient .
♦ Disconnect the suction hose
2
and the return
hose
1
from the appliance using the hose
clips
l
. Clean the outsides of the hoses .
♦ Remove the filter plate
u
of the intake filter
t
(see fig . E) .
♦ Clean the filter plate
u
thoroughly under
running water .
♦ Remove the high-pressure hose
w
from the
connecting thread
r
using an adjustable
spanner . Counter the connection thread
r
using a second adjustable spanner .
♦ Dip the inlet valve
h
into a container filled with
conservation agent (e .g . fine mechanical oil)
so that the fluid can be sucked up .
♦ Insert the plug into a mains power socket .
♦ Hold a cloth in front of the connecting
thread
r
. Turn the pressure regulator dial
3
to position 1 for about 5 seconds . This helps
to preserve the appliance . Turn the pressure
regulator dial
3
to position 0 (off) .
♦ Remove the plug from the mains socket .