Parkside 352048 2007, Instructions Manual

Page: 5 / 36

PFS 710 D3 ■ 2 │
GB
│
IE
│
NI
│
CY
SABRE SAW PFS 710 D3
Introduction
Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product,
please familiarise yourself with all operating and
safety instructions . Use the product only as described
and for the range of applications specified . Please
also pass these operating instructions on to any
future owner .
Intended use
This appliance is designed for sawing, cutting to
length and adapting wood, plastics and construc-
tion materials . The sabre saw is suitable for rough
sawing work, straight and curved cuts and cuts off
surfaces flush . Heed the information concerning
saw blades and practical advice on sawing . Any
other uses of or modifications to the machine are
deemed to be improper usage and may result in
serious physical injury . The manufacturer accepts
no responsibility for damage(s) attributable to
misuse . This appliance is not intended for commer-
cial use .
Features
Stroke rate adjusting wheel
Locking switch
ON/OFF switch
Handle
Footplate
Saw blade
Quick-release chuck
Work light
Locking lever for footplate
Cover for carbon brushes
Release button
Saw blade for wood
Bimetal saw blade
Package contents
1 sabre saw PFS 710 D3
1 saw blade for wood HCS 152 mm
(SWISS MADE)
1 bimetal saw blade 152 mm
(SWISS MADE)
1 set of operating instructions
Technical data
Rated voltage 230 V ∼, 50 Hz (AC)
Rated power consumption 710 W
Rated idle speed
n
0
0 – 2800 rpm
Stroke length 20 mm
Max . cutting performance Wood 160 mm
Aluminium 18 mm
Metal 8 mm
Sawblade mounting ½" (12 .7 mm)
Protection class II /
(double insulation)
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841 . The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
PA
= 88 dB(A)
Uncertainty K = 5 dB
Sound power level L
WA
= 99 dB(A)
Uncertainty K = 5 dB
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Total vibration value
Cutting boards a
h,B
= 9 .8 m/s
2
Uncertainty K = 1 .5 m/s 2
Cutting wooden beams a
h,WB
= 12 .1 m/s
2
Uncertainty K = 1 .5 m/s
2