Parkside 346220 2004, Operation And Safety Notes Translation Of The Original Instructions

Page: 36 / 232

32 GB
˜
Changing rotary direction
Push through the rotation direction switch [ 5] to set the rotary
direction (Fig . C):
Switch pushed from Direction Direction indicator
Right (b)
Tighten
screws
[ 2]
Left (a)
Loosen
screws
[ 4]
˜
Safety lock
Set the rotation direction switch [ 5] to the middle position so that it
protrudes equally on both sides . The switch trigger
[ 7]
cannot be
pressed in this setting .
˜
Changing bits and magnetic bit holder
Pull out the bit [ 11] . Insert another type of bit into the bit
holder
[ 1]
or the magnetic bit holder
[ 10]
(Fig . D) .
NOTE:
Screw bits are labelled according to their dimensions
and their shape . If you are unsure, always try the particular
screw bit out to see whether it sits in the screw head without any
free play .