Parkside 334017 1910, Translation Of The Original Instructions

Page: 26 / 118

26
GB IE
Warning! During operation,
this electric tool generates an
electromagnetic fi eld which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk of
serious or lethal injuries, we
recommend that persons with
medical implants consult their
doctor and the manufacturer
of their medical implant be-
fore operating the machine.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 12 V Team series. A
detailed description of
the charging process
and further information
can be found in the se-
parate operating inst-
ructions.
Operation
Removing/inserting the
Battery
1. To remove the battery (10) from the ap-
pliance, press the release button (11)
on the battery and pull out the battery.
2. To insert the battery (10), place it on
the guide track and push it into the ap-
pliance. It will audibly snap in.
Checking the battery charge
level
The battery’s (
10) charge level is indi-
cated by the charge state indicator (
4).
The LEDs indicate the battery’s charge
level, when the device is in operation.
Press and hold the power button (
7).
red-yellow-green => Battery fully charged
red and yellow
=> Battery half charged
red => Battery needs
to be charged
Recharging the battery
Allow a hot battery to cool before
charging.
Charge the battery (
10) when
only the red LED on the level indica-
tor is illuminated.
The charging time is around 1 hour.
1. Remove the battery (
10) from the
appliance if necessary.
2. Plug the battery charger (
13) into a
mains outlet.
3. Insert the battery (
10) in the charg-
ing compartment of the battery charger
(
13).
4. Pull the battery (
10) out of the bat-
tery charger (
13).
5. Unplug the battery charger (
13)
from the mains.
Choice of gear
Slide the gear selector (5) to
1 or 2 ,
corresponding to a low or high torque
selection.