IE
GB
29
Adjust the height of the blade using the
screws (16).
Check that the blade is flush by placing
a small piece of wood over the planer
sole with and without the groove. The
blades must touch the piece of wood
evenly.
8. Tighten the blade holder (14) and bla-
de (17) in the centre of the planer shaft
using the nuts (15).
9. After tightening the nuts, check that the
blade is flush again!
Cleaning
Always remove the recharge-
able battery before carrying
out work on the device.
Risk of injury!
• Clean the housing with a dry cloth or
paint brush.
Do not clean the blade using water, cle
-
aning agents or sharp objects.
• Clean the ejection chute (
8) regularly
using an appropriate tool (e.g. a piece
of wood, or using compressed air).
Storage
Store the device in a dry place, out of
reach of children.
Disposal/environmental
protection
Remove the battery from the device and
recycle the device, battery, accessories
and packaging in an environmentally-fri-
endly manner.
Electrical devices do not belong in
domestic waste.
Do not throw batteries into domestic
waste, fire (risk of explosion) or
water. Damaged batteries can harm
the environment and your health if
poisonous fumes or liquids escape.
• Take the device to a recycling plant.
The plastic and metal parts used on
your appliance can be properly sorted
according to materials and grades and
efficiently recycled. Please contact our
service centre for more information.
• Dispose of the batteries according to
local standards. Hand in discharged
batteries at a used battery collection
point where they are recycled in an en-
vironmentally friendly manner. For more
information, please contact your local
waste management provider or our ser-
vice centre.
• We will dispose of any defective de-
vices that you send to us free of char-
ge.
