GB
IE
26
g) Harmful dust can occur
when working.
Wear a
respiratory mask and attach an
external dust extraction system.
h) In the case of danger,
switch off the planer im-
mediately and remove the
battery from the device.
i) Check the blade regular-
ly for damage. Only use
sharp, undamaged bla-
des.
k)
Ensure that the vents are free of
soiling.
l) Remove the battery
- at all times when the user is not
in the vicinity of the machine,
- before the removal of blockages,
- before checking, cleaning or
working on the machine,
- after touching a foreign body in
order to check the machine for
damage,
- for an immediate check if the
machine begins to vibrate
excessively.
m)Do not use any accessories
that are not recommended
by PARKSIDE.
This can result
in electric shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 12 V Team series. A
detailed description of
the charging process and
further information can
be found in the separate
operating instructions.
Initial start-up
Charging the battery
If warm, allow the battery to cool
before charging.
Do not expose the battery to direct
sunlight for long periods and do not
place it on a radiator (max. 50 °C).
1. 1. Plug the charger into a socket.
2. Slide the battery (6) into the charging
slot of the charger.
3. Once charging is complete, disconnect
the charger from the mains supply.
4. Remove the battery (6) from the charger.
Overview of the LED indicators on
the charger:
Green LED illuminated while the battery is
not inserted:
Charger is ready.
Green LED lights up:
Battery is charged.
Red LED lights up:
Battery charging.
Extracting shavings/dust
You can use the cordless planer optionally
with an external shavings extractor (not
included in delivery) or with the shavings
ejector.
The shavings are ejected on both sides of the
ejection chute if neither the shavings ejector
nor an external shavings extractor are used.
Shavings ejector
Place the shavings ejector (12) into the
ejection chute (8). Make sure that the gui-
de rails on the shavings ejector (12) fit into
the grooves of the ejection chute (8).
The shavings ejector (12) can be fitted to
eject to the left or right.
