![background image](http://html1.mh-extra.com/html/parkside/332006-1907/332006-1907_instructions-manual_3998682068.webp)
PFBS 160 B2
GB
│
MT
│
65
■
Using the grip ring with LED light
♦
Unscrew the union nut anticlockwise off the
thread .
♦
Screw the grip ring with LED clockwise onto
the screw thread .
♦
Move the ON/OFF switch of the LED light to
the position "I" to switch it on (see fig . C) .
♦
Move the ON/OFF switch of the LED light to
the position "O" to switch it off again .
Notes on working with materials/
tools/speed range
■
Use the milling bit for working on wood, plastics
and plasterboard at maximum speed .
■
Calculate the rotational speed range for working
on zinc, zinc alloys, aluminium, copper and
lead by trying it out on test pieces .
■
Use a low rotational speed for work on plastics
and materials with a low melting point .
■
Use a high rotational speed for working on
wood .
■
Carry out cleaning, polishing and buffing work
in the middle range .
NOTE
►
The milling bit is not suitable for steel or
iron . Suitable products are available in stores .
The following are recommendations only and not
binding . When carrying out practical work, carry
out your own tests to see which tool and which
settings are ideal for the material you are working
on .
Set a suitable rotational speed:
Number on the speed
control
Material being
worked
1
Plastics and materials
with a low melting
point
2–3
Stone, ceramics
4
Soft wood, metal
5
Hardwood
Max.
Steel
Summary of Contents for 332006 1907
Page 3: ...C A B 14b...