Parkside 327104 1904, Translation Of The Original Instructions

Page: 8 / 46

PNKP 105 B1
GB
│
IE
│
NI
│
CY
│
5 ■
Additional safety instructions for glue guns
■ Children should be supervised to ensure that they do not play
with the appliance .
■ ATTENTION! This appliance must be placed on its stand
when not in use .
■ Always protect the appliance from rain and moisture . Water
entering a power tool will increase the risk of electric shock .
■ Do not misuse the power cord, e .g . to carry or hang up the appli-
ance, or to pull the plug from the socket . Keep cord away from
heat, oil, sharp edges or moving parts .
If the power cord is damaged or severed during work, do not touch
the cord but rather pull out the plug . Damaged or entangled
cords increase the risk of electric shock .
■ Only for indoor use .
■ If you take a break of longer than 30 minutes, pull out the power
plug .
■ Allow the appliance to cool completely after use and before
storage .
■ Do not work on any material containing asbestos .
■ Avoid the risk of injury or fire as well as health risks: RISK OF
BURNS! The adhesive and the nozzle reach a temperature of
around 105°C . Do not touch the nozzle or the glue . Do not
allow hot glue to come into contact with people or animals . In
case of contact with skin, rinse the affected part in cold running
water for a few minutes . Do not attempt to remove the adhesive
from the skin .
■ Always route the power cable towards the rear, away from the
appliance .