Parkside 322690 1901, Operation And Safety Notes

Page: 40 / 139

39 GB/IE
Flush cuts
(Fig . K)
¾
With elastic bi-metal saw blades you can
separate water pipes, for example, flush to
the wall .
¾
Make sure that the saw blade is always
longer than the pipe diameter . There is a risk
of kickback and personal injury .
˜
Cleaning and care
m
WARNING!
Always switch the product off, remove
the battery pack 8 and let the
product cool down before performing
inspection, maintenance and cleaning
work!
˜
Cleaning
¾
Never allow fluids to get into the product .
¾
The product must always be kept clean, dry
and free from oil or grease . Remove debris
from it after each use and before storage .
¾
Regular and proper cleaning will help ensure
safe use and prolong the life of the product .
¾
Clean the product with a dry cloth . Use a
soft brush for areas that are hard to reach .
¾
In particular clean the air vents after every
use with a cloth and soft brush .
¾
The vents must always be clear .
NOTE
u
Do not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
˜
Maintenance
¾
The product is maintenance-free .
¾
Before and after each use, check the product
and accessories (e .g . saw blades) for wear
and damage . If required, exchange them
for new ones as described in this instruction
manual . Observe the technical requirements
(see “Technical data”) .
¾
Check covers and safety devices for
damages and correct installation . Replace as
necessary .
¾
Replace a blunt or bent saw blade or one
which has been damaged in some other
way .
˜
Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .