Parkside 322690 1901, Operation And Safety Notes

Page: 36 / 139

35 GB/IE
Accessories and saw blades are available
through your authorised dealer . When buying
always consider the technical requirements of this
product (see “Technical data”) .
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer .
NOTE
u
This instruction manual contains
information and suggestions for several
saw blades and their uses . The saw blades
depicted are not necessarily included in
the shipment, but are meant to indicate
additional possibilities for using this
product .
Suitable battery packs and chargers
Battery
pack:
Parkside 20 V battery pack
PAP 20 A1, PAP 20 A2, PAP 20 A3
Charger:
Parkside 20 V charger PLG 20 A1,
PLG 20 A2, PLG 20 B1, PLG 20 A3
˜
Operation
˜
Attaching/removing the
battery pack
¾
Removing the battery pack:
Press the
battery pack release button 11 . Remove the
battery pack 8 (Fig . D) .
¾
Attaching the battery pack: Align the
battery pack 8 to the handle and slide it
into it . Ensure it clicks noticeably in place .
˜
Checking the battery pack
charging level
(Fig . B)
¾
Check battery pack charge level: Press the
button 12 . The charging level LEDs 13
light up:
LED 13
Charging level
Red / orange / green Maximum
Red / orange
Medium
Red Low
˜
Charging the battery pack
(Fig . C)
NOTE
u
The battery pack 8 may be charged at
any time without reducing the life .
u
Interrupting the charging process does not
damage the battery pack 8 .
¾
Charge the battery pack 8 before
operation when it is at medium or low
charging level .
¾
The charging control LEDs (green 16 and
red 17) indicate the status of the charger 14
and the battery pack 8 :
LED Status
Red LED lights up Battery pack
charges
Green LED lights up Battery pack fully
charged
Green and red LED
flashing
Battery pack
defective
Red LED flashing Battery pack too
cold or too warm
Green LED lights up
(without battery pack) Charger ready
¾
Insert the battery pack 8 into the charger
14 .