![background image](http://html1.mh-extra.com/html/parkside/321231-1901/321231-1901_translation-of-the-original-instructions_4115249058.webp)
PFBS 12 B3
GB
│
MT
│
55
■
j)
Hold the power tool only by the insulated
gripping surfaces when performing an oper-
ation where the accessory tool may contact
hidden wiring or its own cord.
Contact with
a live cable can also make metal parts of the
appliance live and could result in an electric
shock.
k)
Always hold the power tool firmly.
When
running up to full speed, the torque of the motor
can cause the power tool to twist.
l)
If possible, use clamps to hold the workpiece
in position. Never hold a small workpiece
in one hand and the power tool in the other
while you are using it.
By clamping small
workpieces, you keep both hands free for better
control of the power tool. When cutting round
workpieces such as dowels, rods or pipes, be
aware that these can roll away and this can
cause the tool to jam and be thrown towards
you.
m)
Hold the power cord away from any rotating
accessories.
If you lose control of the appli-
ance, the cord may get cut or caught and your
hand or arm could get caught in the rotating
accessory tool.
n)
Never put the power tool down until the
accessory tool has come to a complete stand-
still.
The rotating accessory tool can come into
contact with the surface and cause you to lose
control of the power tool.
o)
When changing accessory tools or changing
settings, tighten the collet nut, the chuck or
other fixing elements tightly.
Loose fastening
elements can shift unexpectedly and lead to
loss of control; unsecured, rotating components
will fly off violently.
p)
Do not leave the power tool running whilst
carrying it.
Accidental contact between your
clothing and the rotating accessory tool could
lead to physical injury.
q)
Clean the ventilation slits of your power tool
regularly.
The engine fan draws dust into the
housing and a strong accumulation of metal
dust can cause electrical hazards.
r)
Do not use the power tool in the vicinity of
flammable materials.
Sparks can ignite such
materials.
s)
Do not use any accessory tools which require
liquid coolant.
The use of water or other liquid
coolants may lead to electric shock.
Additional safety instructions for all
applications
Kickback and corresponding safety instruc-
tions
Kickback is a sudden reaction caused when a
rotating accessory tool, e.g. grinding disc, grinding
band, wire brush, etc., catches or jams and leads
to an abrupt stop of the rotating accessory tool.
If this happens, an uncontrolled power tool will
turn rapidly against the direction of rotation of the
accessory tool.
If, for example, a grinding disc catches or jams,
the edge of the grinding disc that is projecting into
the workpiece can get caught and break off the
grinding disc or cause a kickback. The grinding
disc can then fly in the direction of the operator
or away from him, depending on the direction of
rotation of the disc at the blockage. This can also
break grinding discs.
A kickback is caused by improper or incorrect use
of the power tool. This can be avoided by taking
proper precautions as described below.
Summary of Contents for 321231 1901
Page 3: ...A B ...
Page 51: ...PFBS 12 B3 48 PT ...
Page 67: ...PFBS 12 B3 64 GB MT ...
Page 83: ...PFBS 12 B3 80 DE AT CH ...