![background image](http://html1.mh-extra.com/html/parkside/316707-1904/316707-1904_translation-of-the-original-instructions_758324020.webp)
20
GB
IE
General description
The illustrations can be found on
the front and rear fold-out pages.
Scope of delivery
Unpack the equipment and check that it is
complete. Dispose of the packaging mate-
rial correctly.
• Appliance
• Sharpener for
knives and scissors
• Sharpener for drills
• Sharpener for picks and chisels
• Spare grinding wheel
• Instruction Manual
Function description
The sharpening station is suitable for
sharpening tools (e.g. drills, knives, scis-
sors, picks, chisels). The scope of delivery
contains three sharpeners for this purpose,
which, as a guide and safety device, en-
able precise sharpening and grinding.
Refer to the following descriptions for a
functional description of the controls.
Summary
1 Mains plug
2 Sharpener for knives and scissors
3 On/off switch
4 Spacer
5 Magnet holder
6 Tool table
7 Retaining screw for
angular adjustment
8 Protective hood
9 Mounting holes for work bench
assembly
10 Grinding wheel
11 rotatable drill mount
12 Knurled nut for drill-fastening
13 Release lever for
sharpener
14 Drill holder
15 Adjusting device
16 Grinding wheel nuts
Technical specifications
Tool sharpening station .. PSS 65 B1
Nominal
input voltage .......... 220 - 240 V~, 50 Hz
Power consumption ... 65 W (S2 10 min)*
Measurement idling speed n
0
... 6700 min
-1
Safety class .....................................
II
Protection category......................... IP 20
Weight .........................
approx. 1.35 kg
Grinding angle range ................15° - 50°
Sharpness drill diameter ............ 3 -10 mm
Sharpness knife width .............. 6 - 51 mm
Grinding wheel
Outer diameter .................. Ø 49.5 mm
Borehole diameter ............ Ø 10.14 mm
Thickness ................................7.9 mm
Abrasive ............................... Diamond
Base body ..................................Metal
Working speed ................
max. 60 m/s
Rotational speed .......
max. 23100 min
-1
Sound pressure level
(L
pA
) ................... 59.3 dB(A); K
pA
= 3 dB
Sound power level
(L
WA
) ................. 73.5 dB(A); K
WA
= 3 dB
* A break is introduced after 10 minutes of
uninterrupted operating duration until the de-
vice temperature differs 2 K (2 °C) less than
room temperature.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Summary of Contents for 316707 1904
