![background image](http://html1.mh-extra.com/html/parkside/312142/312142_operation-and-safety-notes_4141514007.webp)
07
Assembling the soldering stand (fig. A/B)
Cleaning sponge and adjustable workpiece holders
3. Before use
• Fit the soldering iron holder (15) to the soldering stand (1).
• After sliding the soldering iron holder (15) as far as it will go into the hole (1), turn it
clockwise to fix it in place.
• For convenience the cleaning sponge (2) can be placed in the space provided on the
soldering stand (1). Moisten the soldering sponge (2) slightly before use.
• The soldering stand (1) is equipped with two adjustable workpiece holding clamps (3),
which are handy when working an wires and similar workpieces.
Accessory compartment
• The soldering stand is fitted with a useful accessory compartment for instance for storage
of the soldering tips.
Fitting and replacing tips (fig. C)
d
e
CAUTION - DANGER OF BURNS!
Always allow the soldering iron to cool down completely before
changing the tip!
Select a suitable tip for your application.
• The pointed soldering tip is particularly suitable for point soldering and thin cables.
• The flat soldering tip is particularly suitable for light electrical work.
• The woodburning tips are suitable for a wide range of woodburning jobs.
The tip holder (8) and the tips (9-14) are threaded. This ensures quick and easy fitting and
replacement of the tips.
• Screw the required tip (9-14) firmly into the tip holder.