Parkside 311912 Translation Of The Original Instructions Download Page 11

PBH 1050 B2

■ 

8 

GB

IE

NI

CY

Maintenance and cleaning

 WARNING! RISK OF INJURY! Switch 
the appliance off and remove the 
power plug before starting any work 
on the appliance.

 

Never permit liquids to enter inside the appliance.

 

Use a soft, dry cloth to clean the housing.

 

Clean the tool holder   regularly:

CAUTION! PRELOADING!

 

To do this, pull the locking collar   backwards 
and pull the dust protector cap   off the tool 
holder  .

 

Before fitting a tool into the tool holder  , 
grease it lightly.

 

WARNING!

 

If the power cord requires replacement, this 
should be carried out by the manufacturer or 
an approved representative to avoid safety 
hazards.

 NOTE

 

Replacement parts not listed (such as carbon 
brushes, switches) can be ordered via our 
service hotline.

Disposal

 The packaging is made from environmen-
tally friendly material and can be disposed 
of at your local recycling plant.

Do not dispose of power tools in 
your normal household waste!

European Directive 2012/19/EU requires that 
worn-out power tools be collected separately and 
recycled in an environmentally compatible manner.
Your local community or municipal authorities 
can provide information on how to dispose of the 
appliance.

Dispose of the packaging in an 
environmentally friendly manner. 
 Note the labelling on the packaging 
and separate the packaging material 
components for disposal if necessary. 
The packaging material is labelled 
with abbreviations (a) and numbers 
(b) with the following meanings:  
1–7: Plastics, 
20–22: Paper and cardboard, 
80–98: Composites

 Your local community or municipal 
authorities can provide information on 
how to dispose of the worn-out 
product.

Kompernass Handels GmbH 
warranty

Dear Customer,
This appliance has a 3-year warranty valid from 
the date of purchase. If this product has any faults, 
you, the buyer, have certain statutory rights. Your 
statutory rights are not restricted in any way by the 
warranty described below.

Warranty conditions

The validity period of the warranty starts from the 
date of purchase. Please keep your original receipt 
in a safe place. This document will be required as 
proof of purchase.
If any material or production fault occurs within 
three years of the date of purchase of the product, 
we will either repair or replace the product for you 
at our discretion. This warranty service is depend-
ent on you presenting the defective appliance and 
the proof of purchase (receipt) and a short written 
description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product 
will either be repaired or replaced by us. The repair 
or replacement of a product does not signify the 
beginning of a new warranty period.

Summary of Contents for 311912



































Reviews: