Parkside 292167, Translation Of The Original Instructions, Page: 18 / 90

PDSS 16 A1
GB
│
IE
│ 15 ■
Package contents
1 air die grinder set PDSS 16 A1
2 assembly tools
1 connector nipple 6 .35 mm (1/4") (pre-assembled)
5 grinding bits (3 mm)
5 grinding bits (6 mm)
1 collet chuck 1/4" / Ø 6 .35 mm (pre-assembled)
1 collet chuck 1/8" / Ø 3 .2 mm
1 carrying case
1 set of operating instructions
Technical data
Rated air pressure: max . 6 .3 bar
Air consumption: 198 l/min
Max . rotational speed: 22500 rpm
Tool fitting:
Ø 6 .35 mm (1/4")
(collet chuck)
Ø 3 .2 mm (1/8")
(collet chuck)
Noise emission values:
Noise measurement determined in accordance
with ISO 15744:
Sound pressure level:
L
pA
= 88 .2 dB (A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 99 .2 dB (A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!
Vibration emission value:
Vibration values determined in accordance
with ISO 28927-12 and EN 12096:
a
h
= 3 .34 m/s 2
Uncertainty K = 0 .87 m/s
2
WARNING!
► The noise emission levels specified in these
instructions have been measured in ac-
cordance with the standardised measuring
procedure specified in ISO 15744 and can
be used to make equipment comparisons .
The noise emission values vary in accordance
with the use of the compressed air tool and
may be higher than the values specified in
these instructions in some cases . It is easy to
underestimate the noise emission load if the
compressed air tool is used regularly in a
certain manner .
NOTE
► For an accurate estimate of the noise emis-
sion load during a certain working period,
the times during which the appliance is
switched off or is running but not actually
being used must also be taken into considera-
tion . This can significantly reduce the noise
emission load over the total working period .
WARNING!
General safety instruc-
tions for compressed air
tools
WARNING!
► Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury .
NOTE
► The terms "compressed air tool" or "tool" used
in the following text refer to the compressed air
tools specified in these operating instructions .
Save all warnings and instructions for future
reference.
■ The user must evaluate the specific risks that
may arise due to different kinds of use .